Pombo inhaler for children WHB04 x 1 piece

• The Pombo inhaler for children WHB04 is a device indicated for the administration of drugs by inhalation. It is a compressor inhaler with a piston pump designed for continuous operation up to 3 hours. The device converts the liquid medicine into a mist.

Included in the Pombo Inhaler for children WHB04:

Connecting tube, medicine container, adult mask, pediatric mask.

Operation of the Pombo inhaler for children WHB04:

The compressor inhaler with a piston pump (pneumatic) designed for continuous operation up to 3 hours is recommended for administering most medical solutions. The Pombo inhaler for children WHB04 is characterized by a high respirable fraction of 80%. The device turns liquid medication into a mist that is easy to inhale. The inhaler produces a stream of air that enters the nebulizer through the air tube. Once the air enters the nebulizer, it converts the solution into an aerosol. Many drugs administered in this way work more effectively.

Application:
The Pombo inhaler for children WHB04 is intended for use in children and adults to administer drugs by inhalation.

Additional information:
Keep the product out of reach of children, at room temperature. It is recommended to protect against moisture and light. Always clean and degrease the end of the hose with alcohol or a preparation for disinfection after use. Each inhaler user should have their own set of mask + tubing, regardless of whether it is a family member.

Technical data:
Voltage EU: 230V/50Hz, power supply EU: T 2A-250V, max. pressure: approx. 1.2 bar. Dimensions: 205mm x 168mm x 100mm. Weight: 1.7kg. Noise level (1m distance): 60dB(A). Continuous work. Nebulizer: minimum drug dose - 2ml, maximum drug dose - 8ml, volume remaining in the nebulizer up to 1ml, respirable functions - 0.5 to 5μm 80%; working pressure (with nebulizer) - approx. 0.60 bar; working conditions: temperature: min. 5st C; max. 40 degrees C; air humidity: min. 10%; max 95%; storage conditions: temperature: min. -25 degrees C; max. 70 degrees C; air humidity: min. 10%; max 95%; transport conditions: temperature: min. -25 degrees C; max. 70 degrees C; air humidity: min. 10%; max 95%; storage and operating conditions apply at atmospheric pressure: min. 700hPa; max 1060HPa.

How to use the Pombo Inhaler for children WHB04:

Use as intended. Please read the instruction manual before use. Perform the procedure in a lying or sitting position. Make sure all parts are clean. Prepare the inhalation medicine and 0.9% NaCl solution, if recommended, to create a lower concentration solution so that the device can produce an aerosol. Then connect one end of the tubing to the inhaler, the other to the mask or mouthpiece, make sure that the mask adheres well to the nose and mouth. Turn the device on and start it up. The medicine will change from a liquid form to a mist. Inhalation is complete when the mist is no longer visible.