MIKROZID universal liquid quick surface disinfectant

Disinfectant, mikrozid ^® universal liquid

Low alcohol usage solution for quick disinfection of non-invasive medical devices and other surfaces.

Disinfectant, MIKROZID universal liquid quick surface disinfectant characteristics

• good material compatibility (e.g. tablets)
• quick effectiveness (Noro 30 sec.)
• effective based on EN 16615 (4-field test) in 1 minute.
• dermatologically tested
• without dyes and perfumes
• excellent cleaning performance
• ready to use

Areas of Disinfectant, MIKROZID universal liquid quick surface disinfectant application

Alcoholic rapid disinfection for medical devices in all areas and wipeable surfaces of all kinds with an increased risk of infection and the need for short exposure times and good material compatibility:

• Areas close to patients
• Patient treatment units
• examination tables
• Operating tables with adjacent work surfaces
• Non-invasive medical device surfaces
• Keyboards and control panels of sensitive communication devices, such as smartphones and tablets

For rapid disinfection of medical devices and other surfaces

Warning:
Use biocidal products carefully. Always read label and product information before use.

Active Disinfectant, MIKROZID universal liquid quick surface disinfectant ingredients

• 174 mg isopropanol
• 126 mg ethanol 94% (v/v)

Areas of application
Alcoholic rapid disinfection for medical devices in all areas and wipeable surfaces of all kinds with an increased risk of infection and the need for short exposure times and good material compatibility, such as: E.g.:

• Areas close to patients
• Patient treatment units
• examination tables
• Operating tables with adjacent work surfaces
• Medical device surfaces
• Keyboards and control panels of sensitive
  communication devices, such as smartphones and tablets

Product data
100 g active ingredient solution contains active ingredients:
17.4 g propan-2-ol, 12.6 g ethanol (94% w/w)
Labeling according to Regulation (EC) No. 648/2004: < 5% anionic
surfactants

Application instructions
Apply undiluted to the surface, wipe and allow to take effect.

Spray the surface from a distance of approx. 30 cm (approx. 40 ml/m²) and allow to dry.

Ensure complete wetting.

For adenovirus and Mycobacterium tuberculosis, keep the area moist throughout the entire exposure time.

Make sure all visible contamination is removed before disinfection.

Not suitable for final disinfection of semi-critical and critical medical devices!

The product can be used without gloves if infection control and occupational safety permit this.

Special instructions
Use disinfectants carefully.

Always read label and product information before use.

Please note the fire and explosion protection when using alcohol-based disinfectants in the BR rule "Disinfection work in the health service".

Further details are available upon request.