Microneb inhaler x 1 piece

• The Mikroneb inhaler is an inhaler designed for intermittent use of 20-30 minutes. It is an easy-to-use portable piston inhaler suitable for administering almost all drugs by inhalation. Masks for children and adults are included.

Included Microneb Inhaler:

Mikroneb inhaler, mouthpiece, inhalation mask, pediatric inhalation mask for children, air tube, Quickjet nebulizer, nosepiece, filters.

How the Mikroneb inhaler works:

Portable compressor inhaler with piston pump (pneumatic) - Mikroneb inhaler. The device is designed for intermittent operation of 20-30 minutes. The inhaler is equipped with a piston compressor that does not require lubrication and a replaceable air filter (it should be replaced every 100-120 applications). The device has a high respirable fraction of 80%. The inhaler converts the drug solution into a mist that is easy to inhale. This type of nebulizer can be used with most medical solutions.

Application:
Mikroneb inhaler intended for use in order to administer drugs by inhalation.

Additional information:
Keep the product out of reach of children, at room temperature. It is recommended to protect against moisture and light. Each inhaler user must have their own set of mask + tubing, regardless of whether it is a family member. Each time after use, the end of the hose should be cleaned and degreased with alcohol or a disinfectant.

Technical data:
Piston compressor: operating voltage (EU): 230V - 50Hz 100W, dimensions: 143mm x 155mm x 110mm, weight: 1.1kg, risk class according to MDD 93/42/EEC: II a; maximum pressure: 1.6 bar; air flow: 10 l/min; working pressure: 0.6 bar; working flow: 5 l/min; volume: 58dB; ambient parameters - work: 10-40 degrees C, humidity: 10-95%; ambient parameters - storage: -25-70st. C, humidity: 10-95%. Quickjet nebulizer: storage conditions: humidity 5-95%; minimum working flow 5l/min; working pressure 150kPa (1.5 bar); maximum working flow 7.5 l/min; working pressure 150 kPa (1.5 bar); minimum capacity 2ml; maximum capacity 12ml, volume remaining in the nebulizer: up to 1ml. The device has been designed in accordance with European manufacturing and safety standards for electromedical devices (EN60601-1;

How to use the Mikroneb Inhaler:

Please read the instruction manual before use. Inhalations should be done in a sitting or lying position. Make sure that all parts of the inhaler are clean before the procedure. Prepare the drug intended for inhalation and 0.9% NaCl solution, if recommended, to create a lower concentration solution so that the device can generate an aerosol. Then connect one end of the tubing to the inhaler, the other to the mask or mouthpiece (fit the mask carefully around the nose and mouth). Turn on the power, then turn on the device. Inhalation is complete when the mist is no longer visible.