Biotraxx Water Conditioner Classic 1:1 Set with sodium chlorite and hydrochloric acid 5% 200 ml
Drops for water treatment and water disinfection contains:
100 ml Component A: 25% sodium chlorite solution
100 ml Component B: 5% activator (hydrochloric acid)
Instructions for use:
Biotraxx Classic 1:1 consists of two components for food-grade drinking water disinfection in accordance with the guidelines of the Drinking Water Ordinance. Activation of the two components produces the active ingredient chlorine dioxide.
One Biotraxx Classic 1:1 set is sufficient to disinfect up to 3000 liters of drinking water.
Bottled in miron violet glass bottles for light-protected storage and optimal shelf life. Both solutions (components A and B) were energized during the manufacturing process.
The energization causes a
- improved structuring of the contained water molecules
- Energetic protection formula against electrosmog (high frequency and low frequency)
- positive information on optimal availability and effectiveness.
Shelf life at least 2 years (prerequisite: no direct sunlight and dry storage).
Advantages of the activator:
The 1:1 mixture is easy to use!
Mix 1 drop of water purifier with 1 drop of activator in a glass.
The reaction time is short, approximately 30 seconds (visible by the color change from transparent to ochre/yellow).
Contamination of the activator is prevented by using 5% hydrochloric acid.
DANGER:
Hazard warnings:
H302 Harmful if swallowed.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
EUH032 Contact with acids releases very toxic gas.
Safety instructions:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Until the 8th ATP comes into force on February 1, 2018: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.)
P313 Get medical advice/attention.
P406 Store in a corrosion-resistant/… container with a corrosion-resistant inner liner. (The insertion left open by the legislator must be completed by the distributor.) (Until the 8th ATP comes into force on February 1, 2018: Store in a corrosion-resistant/... container with a corrosion-resistant lining.)
P501 Dispose of contents/container to... (The insertion left open by the legislator must be completed by the distributor.)
Use biocidal products carefully. Always read the label and product information before use.
Legal warnings:
Use drinking water disinfectants carefully. Always read the product information and label before use.
- The product is classified and labelled according to EC directives.
- Harmful if inhaled and in contact with skin.
- Causes burns. Keep locked up and out of reach of children.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Wear suitable protective clothing, gloves and eye/face protection when working.
- In case of accident or if you feel unwell, seek medical advice immediately (show the label if possible).
When mixed with one of our activators, the biocidal active ingredient chlorine dioxide is created. Chlorine dioxide is approved for drinking water treatment.